Home › Bollards and Physical Barriers
Reliable, professional bollard installation in Roswell, GA from Legendary Fence Company Roswell. Contact us today for a free on-site estimate.
Legendary Fence Company Roswell provides professional bollard installation throughout Roswell, GA, Georgia and the surrounding area. Our licensed, insured crew delivers safe, clean, on-time work with a free estimate before anything begins. Call 770-821-1841 or request your free quote.
Practical uses for bollards and barriers in Roswell
If you own or manage property in Roswell, you have probably noticed more bollards and vehicle barriers going in around shopping centers, schools, medical offices, and warehouses. That is because simple fencing is not always enough to keep vehicles where they belong. Legendary Fence Company Roswell installs bollards and physical barriers that are designed to stop cars and trucks from reaching areas where people walk, shop, or work.
Typical uses include protecting storefront glass along Holcomb Bridge Road, separating parking areas from outdoor dining, securing loading docks along industrial corridors, and controlling access to service drives and dumpsters behind commercial buildings. In residential settings, bollards and barriers can help protect gas meters, AC condensers, pool equipment, and mail kiosk areas in townhome and condo communities.
We focus on function first. Every project starts with a clear question: what are you trying to stop, slow down, or guide? Protecting a front door from a slow-speed parking mishap calls for a different bollard design than blocking a truck from ramming a warehouse entrance. Once the risk, traffic patterns, and property layout are clear, we design a solution that works without making the place look like a fortress.
Because Roswell mixes older developments with new construction, we pay close attention to existing concrete conditions, grades, drainage, and utilities in the ground. A bollard that is poorly anchored in an older, thin slab will fail when you need it most. We inspect and verify before we drill or excavate so you get a barrier that actually performs as expected.
Types of bollards and barriers we install
Legendary Fence Company Roswell works with several bollard types, because no single style fits every site.
Fixed embedded steel bollards are the workhorse option. These are typically 4 to 6 inch schedule 40 or heavier steel pipe, set in drilled concrete or augered holes, then filled with concrete. They are ideal for storefront protection, gas meter protection, and loading dock perimeters. We usually slide a high visibility plastic sleeve over the pipe so you do not need to repaint every year.
Removable bollards are useful where you want security most of the time, but still need occasional vehicle access. These are installed with ground sleeves set in concrete. The bollard posts lift out with a key or special tool and can be stored while a delivery truck or event vehicle uses the space. We often use these at shared drive entrances, sidewalks serving events, or fire lane access points.
Surface mounted bollards bolt to existing concrete using mechanical or epoxy anchors. These are best where heavy excavation is not possible, such as elevated parking decks or sites with a lot of conflicting underground utilities. They provide less impact resistance than deeply embedded posts, so we usually recommend them for traffic guidance and light duty protection.
For larger areas, we design physical barrier systems that may include steel guardrail, crash-rated beam barriers, heavy duty chain between posts, or reinforced fence lines with concrete curbs. In Roswell, we often combine bollards with ornamental iron or aluminum panels to keep the property looking clean while still providing a true barrier to vehicles.
We also install low profile wheel stops and curb barriers to back up bollard systems. These are useful in tighter parking lots around older retail strips where space is limited but owners still need to keep vehicles off sidewalks and landscaped areas.
How our bollard installation process works
A good bollard installation starts long before concrete is poured. Legendary Fence Company Roswell follows a clear process so you know what will happen and why.
1. Site walk and measurement. We meet you on site, walk traffic paths, look at turning radiuses, and check how people currently use the space. We measure setbacks from doors, windows, hydrants, and ADA routes so bollards do not create new hazards.
2. Utility locating. Before drilling or digging, we call Georgia 811 and coordinate additional private utility locating if needed. In older Roswell properties, we frequently find abandoned lines, unexpected conduit, and shallow telecom. We adjust layouts if we find conflicts so no one loses power or internet.
3. Layout and spacing. We mark proposed bollard positions with paint and flags so you can review them in the field. Standard protective spacing is typically 3 to 5 feet clear between bollards, depending on vehicle size and risk level. We verify that strollers, wheelchairs, and carts can pass where needed.
4. Drilling or excavation. For embedded bollards, we core drill through existing concrete or sawcut and excavate holes as specified. Depths typically range from 24 to 48 inches, depending on design loads and soil conditions. We remove debris and prepare the holes with compacted base material if required.
5. Setting bollards. We plumb and brace each post, then fill with high strength concrete or grout. In some cases we also add internal reinforcement. We respect curing times so the posts reach proper strength before they face any vehicle contact.
6. Finishing work. Once concrete cures, we install sleeves or paint the posts with rust inhibiting coatings, apply reflective tape if needed, and patch surrounding concrete or asphalt so the area looks clean and intentional. We walk the site with you and check alignment, visibility, and access before we call the job done.
Materials, finishes, and design choices
The right material and finish will determine how long your bollards and barriers last and how much upkeep you face. Legendary Fence Company Roswell will walk you through options with honest pros and cons.
For most protective bollards we use structural steel pipe, either raw with industrial paint or covered with a heavy duty plastic sleeve. Sleeves are popular around Roswell retail centers because they resist fading, can match brand colors, and do not chip like paint when carts or bumpers hit them.
If you want a more architectural look, we provide decorative cast iron or fabricated steel covers that fit over structural cores. This lets you meet both safety and HOA or design guidelines, especially in areas where the Roswell Design Guidelines or local overlay districts call for a specific streetscape appearance.
For coastal style or softer aesthetics, we can use aluminum posts with internal reinforcement where appropriate. These are lighter and resist corrosion, good for pedestrian focused areas that still need some vehicle control but not full crash resistance. In pure guidance applications, such as directing traffic in large parking areas, we may use flexible bollards with internal springs that rebound after minor contact.
Barrier systems can include galvanized steel guardrail, which offers strong impact resistance and long life, or powder coated rail for a cleaner look. Chains strung between bollards can be used where you want to keep vehicles out but allow people to step through, such as along the edge of parking near parks or green spaces.
We also consider visibility. In tight lots and on rainy Georgia nights, bollards that blend into the background are a problem. We often recommend contrasting colors, reflective bands at driver eye level, and lighting coordination so drivers can clearly see where not to go.
Costs, permitting, and local considerations
Bollard installation cost in Roswell depends on several concrete factors, not guesswork. Legendary Fence Company Roswell prices projects based on number of posts, depth and size of foundations, site conditions, and any decorative work.
Elements that raise or lower cost include how thick your existing concrete is, whether we can core drill instead of demo and repour sections, how close utilities run to the work, and whether we need traffic control or night work to avoid disrupting your business. Decorative covers, powder coating, and custom colors add to the budget but may be required in some developments.
For most private commercial properties, simple protective bollards do not require a full building permit, but there are exceptions. If bollards are part of a larger renovation, encroach into the public right of way, or are tied to fire access routes, the City of Roswell may want review. We help you determine when drawings or engineer letters are needed and can coordinate with your architect or engineer when required.
Fire lane and emergency access issues are important. We make sure removable or collapsible bollards used to block service drives and gated entries meet fire department requirements so trucks can get in quickly. For multifamily communities and HOA governed neighborhoods, we can supply dimensioned layouts and product data sheets for architectural review committees.
Insurance carriers and corporate safety programs sometimes require impact resistant protection around equipment, propane enclosures, and storefronts. We can align our design with those requirements so you avoid problems during audits or renewals. If you already have a risk assessment report, we will use it as a starting point instead of ignoring the work you already paid for.
How to choose the right installer in Roswell
Not every contractor that sets posts understands real vehicle impact or code concerns. When you compare Legendary Fence Company Roswell to other installers, focus on a few specific points that matter.
Ask how they determine bollard spacing and foundation depth. You should hear clear explanations related to vehicle size, speed, soil, and concrete thickness, not vague assurances. Ask to see example projects around Roswell or nearby cities that match your use, such as storefront protection, dumpster area controls, or loading dock security.
Confirm that they call Georgia 811 and do not rely on guesses about underground utilities. In older plazas, a single bad drill hole can take out phone, data, or irrigation. We coordinate with utility locators, adjust layouts when conflicts show up, and document changes so you know what is under your pavement.
Check how they handle accessibility. Bollards should not narrow an accessible route below ADA standards or block required landings at doors and ramps. We measure and lay out clearances before setting posts, then verify them once installation is complete.
Finally, expect straight talk about what bollards can and cannot do. A simple filled pipe is not a substitute for a fully crash rated system when you are trying to stop high speed vehicles, and any installer who says otherwise is not doing you a favor. Our role is to match the level of protection to the real risk and your budget, then install it correctly so it performs when needed.
